FALLSECURE ANCHOR™
Free-standing anchor point for fall protection.
Mobile Anchor Point
Safely access areas across the roof for cleaning and urgent maintenance with the FallSecure Anchor™ Point (patent pending). A portable, mobile man anchor system that protects against fall without requiring any penetration to the roof surface.
The FallSecure Anchor™ provides continuous vertical and horizontal access and can be installed tool free.
Independently tested for safety and quality
Access all areas of the roof from one point
260kg and 340 kg total system weight options
Product Details
FallSecure Anchor™ is a BS EN795:2012 type E anchor, with single or twin user options. It is designed for roofs and areas with a fall risk. The system is suitable for flat surfaces or roofs with a pitch of up to 5 degrees.
FallSecure Anchor™ is used to access all areas of the roof safely by restricting how close you can get to the edge of building. With the 340kg twin user, the system can also be used as a single person fall arrest solution.
The system is independently tested to meet or exceed the required safety standards.
FallSecure Anchor™ has a modular design to make it easy and convenient to carry and install on site.
Each component weights no more than 20kg. The system takes minutes to install without the need for any tools.
A free-standing height safety solution - no penetration into roof surface.
Suitable for temporary solutions or permanent installation to existing or new buildings.
Can be installed within minutes, tool free.
Safety Information
All safety equipment of this nature needs, by law, regular inspection and maintenance. Maintenance and Retest service and reminders can be provided by our approved testing partners.
Fixed line fall prevention and arrest systems need regular inspection and recertification every 12 months.
Abseil points and suspensions rails require inspection and re-certification every 6 months.